We have proposed a LiDAR system that compresses the scene response in the charge domain using a compressive CMOS image sensor based on the indirect time-of-flight (i-ToF) image sensor. The accuracy of depth estimation can be improved by considering multipath interference (MPI) caused by multiple reflections and scattering of light in the ToF depth imaging. The direct ToF (d-ToF) method is less affected by MPI because it measures the scene response directly using single-photon avalanche diodes (SPADs). However, it is costly to implement d-ToF image sensors and difficult to achieve high pixel counts. In our multi-tap i-ToF image sensor, a compressed scene response is acquired at each pixel and the scene response is restored by ADMM-Net. It is processed by U-Net to estimate the MPI-corrected depth image. In the experiment, we illuminated objects through a diffusive sheet with a pulsed light source (wavelength 660nm, pulse width of 2.5ns FWHM) and captured the reflected light with our prototype sensor with 212 x 188 pixels operated at 606MHz with 32-bit exposure codes. The depth obtained by peak detection for the restored transient images exhibited the objects and the diffusive sheet separately.